51
Bunk Bed
The bunk bed is available as an option only on the R SERIES. This option replaces the top storage
compartments included in the base model and eliminates the front window option.
With the bunk bed option, four people can sleep in the ALTO. During the day, the bed is raised
against the roof. To use it, simply lower it.
NOTE: This option is not compatible with the front storage cabinet included in the base model or
with the optional front window (R SERIES).
Extra Bed
The extra side bed is an option on the F1743 model.
With this option, four people can sleep in the ALTO F1743. During the day, the bed is stored on
the passenger side wall near the counter. To use it, pull out the folding frame, lower the bottom
support leg to the floor and install both hard-backed cushions in the unfolded frame.
FLEX electrical bed
Optional FLEX electrical bed for the ALTO F2414
If you have this option, here is what you need to know:
● never try to raise or lower the bed when a load of 20 lb (9 kg) or more is on it.
● The Flex bed has a static (no movement) load capacity of 375 lb maximum (170 kg).
● The bed has a maximum dynamic capacity of 60 lb (27 kg) including the platform, the
mattress and bedding: so only remains about 20 lb (9 kg) of available load during raising
or lowering.
● The switch to raise or lower the bed is on the cabinet on the passenger side near the
entrance (photo K-5).
● It is possible to raise or lower the bed manually by using the small crank supplied with the
instructions. You need to insert the crank in the hole of the motor cover near the motor
cover light switch (photo K-6).
PHOTO K-4
Rear bench bed
To Next Page
Loading...