APPENDIX A: TECHNICAL SPECIFICATIONS
UNIFLOW
®
4 PULSED HEAT CONTROL
A-8 990-908
STANDARD Version ● 115 VAC Configuration
Switch S1 is set with 115V visible on the switch.
The factory-supplied
115V/230V jumper with the
BROWN wires is installed on connector J7 as shown.
STANDARD Version ● 230 VAC Configuration
Switch
S1 is set with 230V visible on the switch.
The factory-supplied 115V/230V jumper with the
BROWN wires is installed on connector J7 as shown.
REMOTE Version ● 230 VAC Configuration
Switch S1 is set with 230V visible on the switch.
The factory-supplied
230V jumper with the BLUE
wires is installed on connector J7 as shown.
To Next Page
Loading...