Amazone Hektor - Page 44

Overload safety
(1) Hydraulic cylinder
(2) Pressure accumulator
(3) Stop tap
(4) Hydraulic connection
(5) Pressure accumulator valve
DANGER
During operation, it is forbidden to stand close to the plough
beam element and the hydraulic accumulator!
The system is under high pressure!
Danger of accident!
Prior to assembling or disassembling the hydraulic stone release
(cylinder, accumulator, hose lines, tubes, etc.), reduce the system
pressure completely using the pressure control tube. The system is
under high pressure!
Risk of overturning!
Before reducing the system pressure, the plough must be coupled or
suitably supported.
Mode of operation:
When triggered, the plough body presses a piston into the reservoir
via the hydraulic cylinder. The gas is compressed, and after passing
the obstacle, it automatically moves the body back to its initial
position.
Where required, the tripping force can be set via t
he tractor hydraulics
and read from the pressure gauge.
To protect against damage, the stone release must be fitted with a
shear bolt.
44
Hektor BAG0186.1 07.19