Malfunctions and their correction
11 Malfunctions and their correction
Plough does not penetrate
into the soil:
• Draw transverse furrows at the ends of the field
• Replace the shares or use chisel shares
• Set the disc coulter and fertiliser skimmer higher up
• Reduce the pitch a little
The plough does not reach
the desired working depth:
• Set the support wheels higher up
• Lower the hydraulic system
• Replace the shares or use chisel shares
Plough bodies work at
different depths:
• Correct the working depth, adjust
• Correct the pitch
Plough works unevenly:
• Shear bolt on one of the plough beams broke off (replace)
The plough swerves towards
the landside:
• Increase the working depth
• Reduce the pitch
• Install additional glide plates
The plough will not turn
• Replace the implement coupling plug if it does not fit for the
tractor coupling part (opening stroke of the valve body)
See page 47.
64
Hektor BAG0186.1 07.19
To Next Page