6 Road transport
Before each transport journey, check the implement for:
• Damage
• Material fatigue
• Functional reliability of safety-related components for road
transport
• Traffic and operational safety
WARNING
When actuating the external controls for 3-point frame, do not
step between tractor and implement!
There is a high risk of injury!
DANGER
Instruct people to leave the danger area between the tractor and
the implement before you approach the implement.
A speed of 25 km/h may not be exceeded!
Driving in curves forbidden!
It is forbidden to drive in curves during field operation due to
overstraining of the implement!
•
With 3-point mounting, matching of the pin diameters on the
tractor and the plough is essential.
• Prior to connecting and disconnecting the implement to the
three-point suspension, place operating equipment in such a
position as to prevent unintentional lifting or lowering!
• Attach the plough only with the original attachment parts.
• When implement is in transport position, always ensure that
there is sufficient lateral locking of the tractor's three-point
linkage!
• There must be nobody standing between the tractor and
implement unless both are secured by the parking brake and/or
wheel chocks to prevent them from rolling away!
• Handling, steering, and braking capacity are affected by the
implement and ballast weights. Always ensure sufficient steering
and braking capacity!
• When driving in curves, ensure that there is enough space
between the tractor and the implement!
• Observe the permitted transport dimensions according to traffic
regulations!
Hektor BAG0186.1 07.19
35
To Next Page
Loading...
