Amazone Hektor - 9 Use; Rotating the Plough

Use
9 Use
For plough work, set the hydraulic system to pulling force or
combined control.
It is forbidden to drive in curves during operation due to overstraining
of the implement!
WARNING
Overstraining can cause components to break and be flung away
at high speed.
• Ensure that nobody is standing on the spring side (furrow side).
• Keep clear of the plough beam element during operation!
9.1 Rotating the plough
DANGER
The plough sweeps out when it is rotated. Direct people out of
the danger area!
→ Check the immediate area before rotating!
On the headlands:
1. When reaching the headland, lift the implement using the tractor
lower links.
2. When the last share has reached the headland, lift the
implement completely using the running gear.
3. Activate tractor control unit green.
→ Rotate the plough using the hydraulic turnover system.
Ensure that the hydraulic hoses do not bend while rotating.
Operate the hydraulic turnover system only from the tractor
seat!
Hektor BAG0186.1 07.19
47