AM-48 Test Set (18-0015) Power Considerations
0015-S04
4-
Continuous Power On . Set the switch to the <ON> position for power
to be on continuously.
Note: To turn power on continuously when battery voltage is less
than about 5 VDC, first turn power ON in momentary
<ON/OFF> position, then set switch to <ON>.
Power Off . To turn the power off, momentarily press the switch
toward the <ON/OFF> position.
The position of Switch 2 determines the initial display. The default
power-up cursor positions are shown in Figure 3-7.
To Next Page
Loading...