Installation and Start-Up | 3-1
INSTALLATION and START-UP
This chapter shows you how to install and start up the Model 931S and
Model 932S Analyzers, including:
• Safety requirements to consider before working on the analyzer.
• Uncrating, inspecting, and storing the analyzer prior to installation.
• Installing the mechanical components and making the electrical
connections.
• Installing the S93XS System 200 Configurator Software on a computer,
powering up the analyzer, establishing communication with the ana-
lyzer, and performing start-up checks and adjustments.
• Performing a sample system leak check.
The installation of the analyzer must be in accordance with all of the
end user and local regulatory standards and procedures. There are no
operator-serviceable components inside the analyzer. Refer servicing
to qualified personnel.
!
WARNING
To Next Page
Loading...
Need help?
General
