16 User Guide EN Dansensor® CheckMate 3
P/N 300042-I
05/2019
Login
Different levels of login can be set up:
No login At start-up the device will automatically run the self-test and warm-
up period and when finished it changes to show the measuring
screen and will be ready for measuring.
User login At start-up the display will show the list of users.
Use and keys to select user and press key to confirm.
Now the device will run the self-test and warm-up period and when
finished it changes to show the measuring screen and will be ready
for measuring.
Login with User ID At start-up the display will look like this:
Either use barcode scanner (option) to scan User ID or press to
bring up the touch screen keyboard.
NOTE! If you forget your User ID, you should create a new (ask a
Supervisor).
Enter the User ID by means of the touch screen keyboard or the
external keyboard (option). Confirm by pressing the OK key.
Now the device will run the self-test and warm-up period and when
finished it changes to show the measuring screen and will be ready
for measuring.
See "User setup" on page 43 for details about user and login settings.
Log in
USER1
USER2
USER3
13:46
08/17/06
Scan user barcode or press
Enter user id
CDEFG
JKLMN
QRSTU
XYZ .
Ins Del
To Next Page
Loading...
Need help?
General
