Ametek Thermox TM2000 - Page 138

7-2 | Thermox TM2000 Oxygen Analyzer
Warnings!
Observe these cautions when working on the sensor:
• Disconnectpowerfromthesensorandcontrolunitwhenservicing
system components.
• Theoutsideofthesensorcoverandallsensorassemblycomponents
are extremely hot (up to 500° F, 260° C inside the cover), even after
power has been removed from the sensor.
Use caution and wear appropriate gloves when handling system
components!
• Alwaysuseabackupwrenchwhenworkingonsensorplumbing.This
helps to prevent damaging welds and distorting sensor plumbing.
!
CAUTION