Ametek Thermox TM2000 - Variable Table

Serial Communications | A-9
Figure A-3.
Main variable table.
Variable Table
Figure A-3 provides a summary of the variable locations, names, and de-
scriptions available. If you need access to more advanced variables, please
call AMETEK.
Location Name Description Read/Write *Format
00 Flags_3 (see Table A-4) Read Only H (1 byte)
01 Inf_mess_flag (see Table A-5) Read Only H (2 bytes)
02 Config_flags (see Table A-6) Read/Write H (2 bytes)
03 Iout_flags (see Table A-7) Read/Write H (2 bytes)
04 Probe_type Type of probe Read/Write U
connected to (0=Insitu
system 1 = WDG
2 + HP
3 = TM2000
4 = 3-in-1
05 Line1_flg Display Line #1 Read/Write U
(0-off
2 = O2
06 Line2_flg Display line #2 Read/Write 4 = cell temp
6 = cell mv
8 = t/c mv
07 Line3_flg Display Line #3 Read/Write 10 = date/time
12 = user text
08 Oxygen Oxygen reading Read Only F (2 dp)
09 Reserved N/A N/A N/A
0A Reserved N/A N/A N/A
0B Cell_temp Cell temperature Read Only F (1 dp)
0C Cell_mv Cell millivolts Read Only F (2 dp)
0D Tc_mv Thermocouple mv Read Only F (2 dp)
*F = Float. H = Hex, U = Unsigned Decimal, dp = decimal places