Windows 7 and Vista
To access the drive from your Windows desktop:
Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to Map
the Network Drive.
a) Click the Start button.
b) Click Computer.
c) On the Computer page, the drive should appear on the left hand column under Network as
AMPED_USB.
To Map the Network Drive:
a) Click the Start button.
b) Click Computer.
c) Click Map Network Drive from the top bar.
d) Select a drive letter (any), then enter in the folder field either of the following depending on which
USB port is being used:
\\AMPED_USB\usb3\ or \\router’s LAN IP address\usb3\
e) If the drive fails to open, click browse and locate AMPED_USB under Network.
To Next Page
Loading...
