Management: Save and Reload Settings
Saving your current settings allows you to back-up
your current settings which may be reloaded at a later
time. This feature may be useful for testing new
features and settings without having to worry about
returning to a stable platform.
To save current settings:
a) Click Save.
b) Select a file name and location.
To load previously saved settings:
a) Click Browse.
b) Locate the previously saved settings file.
c) Click Upload to restore the settings to the
saved file.
You may also reset the Router’s settings to factory settings by pressing Reset. By resetting the Router, you will
lose all previous configurations and will need to run the Basic Setup Wizard again to configure the Router’s
Settings.
To Next Page
Loading...
