AMX DAS-M-0404 - Page 78

RS-232 Commands / Messages
68
Mi Series Audio Controllers
RS-232 Controller Command Messages (Cont.)
MSTRr,t Set Treble, where:
•‘r’ is the desired room, (1-64)
• ‘t’ is the desired treble level, valid values are:
0: level
1....10: -10....-1 dB
11....20: 1...10 dB
Treble Status
- or -
ERR
MGTRr Get Treble, where:
‘r’ is the desired room, (1-64)
Treble Status
- or -
ERR
MSSCr,s Select Source, where:
•‘r is the desired room, (1-64)
•‘s’ is the desired source, valid values are:
0: no source selected
1-8: for sources 1 to 8
Source Status
- or -
ERR
MGSCr Get Source, where:
‘r’ is the desired room, (1-64)
Source Status
- or -
ERR
MSSRr,s Select SRS, where:
•‘r’ is the desired room, (1-64)
•‘s’ is the SRS state, valid values are:
0: Off
1: Bass Boost
2: SRS 3D
3: Focus
4: WOW
SRS Status
- or -
ERR
MGSRr Get SRS, where:
‘r’ is the desired room, (1-64)
SRS Status
- or -
ERR
MSGLs,i,o Set Gain Level, where:
• ‘s’ is the desired source
• ‘i’ is the desired input gain, valid values are:
0: 0 dB
1: -3 dB
2: -6 dB
3: -9 dB
4: -12 dB
•‘o’ is the desired output gain, valid values are:
0: 0 dB
1: +3 dB
2: +6 dB
3: +9 dB
4: + 12 dB
5: + 15 dB
6: + 18 dB
Gain Status
- or -
ERR
MGGLs Get Gain Level, where:
‘s’ is the desired source (1-8)
Gain Status
- or -
ERR