AMX DAS-M-0404 - Page 79

RS-232 Commands / Messages
69
Mi Series Audio Controllers
RS-232 Controller Command Messages (Cont.)
MSSRr,s Select SRS, where:
•‘r’ is the desired room, (1-64)
•‘s’ is the SRS state, valid values are:
0: Off
1: Bass Boost
2: SRS 3D
3: Focus
4: WOW
SRS Status
- or -
ERR
MGSRr Get SRS, where:
‘r’ is the desired room, (1-64)
SRS Status
- or -
ERR
MSGLs,i,o Set Gain Level, where:
•‘s’ is the desired source
•‘i’ is the desired input gain, valid values are:
0: 0 dB
1: -3 dB
2: -6 dB
3: -9 dB
4: -12 dB
•‘o’ is the desired output gain, valid values are:
0: 0 dB
1: +3 dB
2: +6 dB
3: +9 dB
4: + 12 dB
5: + 15 dB
6: + 18 dB
Gain Status
- or -
ERR
MGGLs Get Gain Level, where:
‘s’ is the desired source (1-8)
Gain Status
- or -
ERR
MSPGr,s Select Paging, where:
• ‘r’ is the desired room, (1-64)
• ‘s’ is the Paging state, valid values are:
0: Off
1: On
Paging Status
- or -
ERR
MGPGr Get Paging, where:
‘r’ is the desired room, (1-64)
Paging Status
- or -
ERR
MSPVr,v Set Paging Volume, where:
•‘r’ is the desired room, (1-64)
•‘v’ is the desired volume level, valid values are:
101: Mute
0...70: 0...-70 dB
Paging Volume Status
- or -
ERR
MGPVr Get Paging Volume, where:
‘r’ is the desired room, (1-64)
Paging Volume Status
- or -
ERR
MGSTr Get General Status, where:
‘r’ is the desired room, (1-64)
General Status
- or -
ERR