AMX DAS-M-0404 - Page 85

RS-232 Commands / Messages
75
Mi Series Audio Controllers
Controller Status Messages (Cont.)
MSRr,s SRS Status, where:
• ‘r’ denotes the room, (1-64)
• ‘s’ denotes the SRS state, valid values are:
0: Off
1: Bass Boost
2: SRS 3D
3: Focus
4: WOW
5: SRS not Available
MGLs,i,o Gain Status, where:
• ‘s’ denotes the source
• ‘i’ denotes the input gain, valid values are:
0: 0 dB
1: -3 dB
2: -6 dB
3: -9 dB
4: -12 dB
• ‘o’ denotes the output gain, valid values are:
0: 0 dB
1: +3 dB
2: +6 dB
3: +9 dB
4: + 12 dB
5: + 15 dB
6: + 18 dB
MPGr,s Paging Status, where:
•‘r’ denotes the room, (1-64)
•‘s’ denotes the Paging state, valid values are:
0: Off
1: On
MPVr,v Paging Volume Status, where:
•‘r’ denotes the room, (1-64)
•‘v’ denotes the volume setting, valid values are:
101: Mute
100...0: -100...0 dB
MBALr,x Balance Status, where:
• ‘r’ denotes the room, (1-64)
• ‘x’ denotes the balance, valid values are:
0: balanced evenly
1...10: 100%.... 10% Left
11...20: 10%... 100% Right
MPRVr,x Privacy Status, where:
•‘r’ denotes the room, (1-64)
•‘x’ denotes the privacy status, valid values are:
0: Off
1: On