Installing and Configuring Your AV Equipment
17
N1000 Series User Manual
FIG. 13 Video Matrix Page
4. Double-click the Encoder’s name in the list. The N-Series Encoder Login page is displayed (see Figure 14). If prompted, use
the following default login credentials to log in for the first time. These can be changed later on the Settings page.
Default username: admin
Default password: password
FIG. 14
Login Page
NOTE: The Login page is only displayed if N-Able's stored username/password does not match the unit's username/password. A
default system will match.
5. The Settings page is displayed (see Figure 15
).
6. Change the Stream setting. We recommend setting Stream to a number between 2 and 254 (it is required that the number be
less than 32,512).
Encoders are listed across
the top of the page.
Decoders are listed down the
left side of the page.
Red Text - No video source (Encoder) or no display (Decoder).
Gray Text - Video output for this unit is disabled.
Black Text - Unit is in live play mode.
Blue Text - Unit is playing locally-stored content.
To Next Page
Loading...
Need help?
General