About this Manual ML248xA / ML249xA
13000-00162 1-3
September 2005
Using this Manual
Users are advised to read through this manual in its entirety before operating the power
meter. The manual should be kept with the unit for reference purposes thereafter.
A brief summary of each of the chapters is given below. If you are viewing the electronic
version of this manual you can click on the chapter headings below to jump to the chapter
in question.
Chapter 1 About this Manual
Details of the manual itself, how it is structured, and how to use it.
Chapter 2 Product Overview
An overview of the product, its features and options.
Chapter 3 Assembly and Connections
How to unpack, inspect and ready the instrument for measurement.
Chapter 4 Front Panel Layout and Operation
Detailed illustrations and explanations of front panel operation.
Chapter 5 Common Procedures
A complete listing of procedures commonly performed and a quick
reference table for locating the procedure required.
Chapter 6 Remote Operation
A brief overview of GPIB and the advantages on offer for the user.
Chapter 7. CW Setup and Measurement
How to set up and run CW measurement.
Chapter 8 GSM Setup and Measurement
How to set up and run GSM measurement.
Chapter 9 CDMA Setup and Measurement
How to set up and run CDMA measurement.
Chapter 10 EDGE Setup and Measurement
How to set up and run EDGE measurement.
Chapter 11 WLAN Setup and Measurement
How to set up and run WLAN measurement.
Chapter 12 Radar Setup and Measurement
How to set up and run radar measurement.
Chapter 13 OFDM Setup and Measurement
How to set up and run radar measurement.
To Next Page
Loading...
Need help?
General
