MS272xB + MS8911B UG PN: 10580-00175 Rev. N 5-1
Chapter 5 — File Management—
ISDB-T SFN
ISDB-T SFN Mode
5-1 Introduction
This chapter describes the file management features and the File menu. The submenus under
this menu allow you to save, recall, copy, and delete files on the internal memory, an external
USB flash drive, or a Compact Flash Card (if installed).
5-2 Managing Files
Press the Shift key then the File (7) key on the numeric keypad to display the File menu.
Saving Files
Press the Save submenu key.
Saving a Setup:
1. Press the Save Setup submenu key. The Save Setup dialog opens, and the Text Entry
menu is displayed.
2. Type a name for the file to be saved and press Enter to save.
Saving a Measurement:
ISDB-T SFN measurements cannot be saved in this menu. Save measurements by pressing
the Save Files main menu key.
Saving a Measurement on Event:
The Save On Event submenu key is not active in ISDB-T SFN mode.
Saving a Measurement Display as JPEG:
1. Press the Save Screen as JPEG submenu key. The Save JPEG list box and the Text
Entry menu are displayed.
2. Type a name for the file to be saved and press Enter to save.
To Next Page
