Memory Bank Switch
Memory Bank Basics:
Bank 0 includes all edited channels (all channels are in Bank 0).
either software programming or the radio itself.
Assign channel to memory bank:
In Memory channel mode, choose a memory channel, press
1. key, bank
number show in the channel number position as "-X
Turn Channel selector knob to choose desired memory bank, press
2. key, the memory channel will
be assigned to the bank.
If the bank already has 32 channels, the new assigned channel will replace the last channel in bank.
3.
In Channel mode, press key twice to enter memory bank mode, press key then press
key to enter into function menu.
Press
1. /
show "BAK--".
Turn Channel switch to choose bank 0--9, press
2.
3.
MEMORY BANK
Remove a channel from memory bank:
While you are in a memory bank,choose a memory channel (that you want to remove from the bank).
Press
key and then press
removal from the memory bank.
To Next Page
Loading...
Need help?
General
