32
SHORTCUT OPERATIONS
Single-band Switching
To avoid interference from the sub channels when the main channel is in use, you can use the single band
Continuous pressing of
CTCSS/DCS Encode and decode
Press
1.
2. key to select positive
or negative code.
3.
Press 4. key or
Cross-Band Repeater (TERMN-8R ONLY)
begin the cross band repeater function.
Turn the power off on the radio
1. .
2. together and power radio the radio on (while holding both buttons) until the
To Next Page
Loading...
Need help?
General
