09
INSTALLATION & CONNECTION
Installing / Removing the Battery
Installing / Removing the Antenna
■ Installing the Antenna:
Screw the antenna into the connector on the top of the transceiver
by holding the antenna at its base and turning it clockwise until
secure.
■ Installing the Battery:
1.
Press the bottom of the battery, the latch in the bottom of 2.
the transceiver lock will release. After hearing a "click", the
battery has been locked.
3
4
■ Removing the Battery:
According to “
”on the battery release, push the battery lock
release tab to remove the battery.
■ Removing the Antenna:
has been removed from the threads of the transceiver.
To Next Page
Loading...
Need help?
General
