56
FUNCTION MENU SETUP
Frequency Reverse
1. Press
" icon, then press
key enter into function menu.
2. Press /
item, it shows "REV
ON:
channel will be interchanged. If CTCSS/DCS signaling is set, it also will
be interchanged.
OFF:
key or
Talk Around ON/OFF
When this function is is turned on, the transceiver will stop communication with a
1. Press
" icon, then press
key enter into function menu.
2. Press
/
item, it shows "TALKAR
TX=RX:
signaling is set, it will interchange decoding CTCSS/DCS as encoding.
To Next Page
Loading...
Need help?
General
