FUNCTION MENU SETUP
Note: User-defined CTCSS encode must be setup by programming software.
CTCSS/DCS Encode Setup
1. Press
" icon, then press
key to enter into function menu.
2. Press
/ T-CDC
3. Press
press
key to choose DCS positive or inverse code.
CTCSS:
DCS:N" stands for positive code, "I" stands
for inverse code.
5. Press
or
CTCSS/DCS Decode Setup
If this function is enabled, you can ignore (can not hear) other unrelated call at the
1. Press
" icon, then press
key to enter into function menu.
2. Press
/ R-CDC
To Next Page
Loading...
Need help?
General
