15
Switch between Main band and Sub band
While in standby press
key to switch between Main band and Sub band. The
Display Arrow will point to the current operating channel.
BASIC OPERATIONS
NOTE:When the transceiver is in channel mode the right side of the frequency will display the channel (or
memory bank) number.
Channel Adjusting
Input channel number by scrolling
1.
counterclockwise to decrease the channel number. If there is a blank channel between two channels, the
(000-199) to switch to the desired channel. If the channel number entered is an un-programmed channel,
the radio will audibly let you know an empty channel has been selected and return to the previously tuned
30 is channel 30, 125 is channel 125.
Input channel number by keypad
2.
Switch between Channel mode and VFO mode
While in standby, press
key to set the selected band into channel mode or
To Next Page
Loading...
Need help?
General
