FUNCTION MENU SETUP
Scanning Resume Time Setup
There are four kinds of scanning dwell time.
1. Press
" icon, then press key
enter into function menu.
2. Press
/
item, it shows "SCAN
NOTE: Individual Squelch levels per channel can be set if you have a PF1/PF2 key programmed as Squelch off.
While the Squelch is off - turn the channel selector knob which will allow a Per-Channel Squelch change.
when the receiving signal strength hits a minimum strength clarity, otherwise, the
transceiver will remain muted.
1. Press
" icon, then press key
enter into function menu.
2. Press / SQL"
00~09:
key or
To Next Page
Loading...
Need help?
General
