75
ADVANCED FUNCTION OPERATIONS
Display Mode Setup
There are three kinds of display (user) modes.
1.
transceiver emits a beep.
Press 2. / key to choose No.01 function item, it shows "DSP
3.
FREQ:
CH:
disabled. With this mode, radio can be used as commercial radio.
NAME:
Press
4. key or
Resume Factory Default
does not work normally (possible due to bad settings)
NOTE: The display mode will can not switch to other mode when transceiver in GMRS/MURS mode.
To Next Page
Loading...
Need help?
General
