51
DCS:N" stands for positive code, "I" stands
for inverse code.
5. Press
or
Note: User-defined CTCSS decode must be setup by programming software.
FUNCTION MENU SETUP
5TONE encode must be programmed by software, only the groups that have edited 5TONE can
be selected. When 5TONE encode has a name, transceiver will display name, otherwise will
display "CALL XX".
5TONE encode group selection
1. Press
" icon, then press key to
enter into function menu.
2. Press
/
item, it shows "5T-ENC
key or
2TONE encode group selection
1. Press " icon, then press key to enter into function
menu.
To Next Page
Loading...
Need help?
General
