SHORTCUT OPERATIONS
MSK (Text) Signal Sending (TERMN-8R ONLY)
When in standby, press
1.
Turn the channel knob to choose the desired alpha numeric character.
2.
3.
chosen.
4.
you to input the receiver's ID then press
Alternatively after you have composed your message, press the
5.
/
(which you will need to input the group ID) and then press
NOTE:Please refer to the MSK ENCODE/DECODE Setup Options to learn more about the basic setup -
found in the ADVANCED FUNCTION OPERATIONS.
NOTE: If the ALT is activated (noted as it will display on your sub-band) - the receiver will automatically
turn on the radio when an emergency ALT message is received! The receiver will turn off after 3 minutes - or
if it is canceled manually.