07
NOTE: When charging a powered on transceiver equipped with battery, the LED will not turn to green to
show the full charge status. Only when you turn off the transceiver, will the LED indicate normally. If the
transceiver is powered on, it will continually consume energy. The charger cannot detect when the battery has
been fully charged and will fail to indicate correctly.
BATTERY INFORMATION
STATUS
when power on
(No battery) Pre-charging
Charge
normally
Charged
Error
(for 1 second)
Green
for 5 minutes
Green
for a long time
5.
6.
NOTE: An Error means the battery is too hot or cold, the battery has short-circuited, or the charger has
short-circuited.
1second when power on)
Pre-charging (pre-charging stage)
Charging
Green light
Green light
To Next Page
Loading...
Need help?
General
