To Next PageTo Next Page
Need help?Do you have a question about the Applent Instruments AT682 and is the answer not in the manual?
General| Brand | Applent Instruments |
|---|---|
| Model | AT682 |
| Category | Measuring Instruments |
| Language | English |
Defines the end-of-line terminator character used for SCPI commands (NL, LF, or ASCII '\n').
Explains the conventions for symbols, brackets, and commands used in SCPI command descriptions.
Describes the tree structure of SCPI commands, including common commands and subsystem hierarchy.
Details the format of SCPI command headers and parameters, including character and numeric data types.
Provides a comprehensive reference for all SCPI commands, organized by functional subsystem.
Covers SCPI commands for setting the measurement parameter (resistance, current) and range.
Details SCPI commands for setting the test voltage applied to the device under test.
Explains the SCPI command for performing the OPEN correction function.
Covers SCPI commands for setting comparator record number, limit values, and beep.
Describes SCPI commands for setting the instrument's operating state to CHARG or DISCH.
Details SCPI commands for setting the charge timer and sample timer values.
Explains SCPI commands for setting the analog-to-digital converter (ADC) convert time.
Covers SCPI commands for controlling system settings, such as keypad lock.
Details SCPI commands for enabling measurements and setting trigger modes (internal, hold, external).
Describes the SCPI command to retrieve measurement data initiated by a trigger.
Explains the SCPI command to retrieve the last error information from the instrument.
Details the SCPI command to query the instrument's model, version, and identification.
