Applent Instruments AT682 - 7.11 TIMEr Subsystem

AT682/683 User’s Manual
42
:CHARage
Command Syntax
STATe:CHARage
Parameters
For example
Tx> STAT？
Rx> discharge
Tx> STAT:CHAR
Tx> STAT？
Rx> charge
Tx> STAT:CHAR
Query Syntax
none
Query Response
none
Constraints
none
:DISCharge
Command Syntax
STATe:DISCharge
Parameters
none
Query Syntax
none
Constraints
none
7.11 TIMEr Subsystem
The TIMEr subsystem sets charge timer and sample timer.
Figure 7-7
TIMEr
Command Tree
:CHARge
The :CHARge command sets charge timer value.
Command Syntax
TIMEr:CHARge <float>
Parameters
<float> fix float or floating point,0-999.9
For example
Tx> TIME:CHAR 100.1 //100.1s
Rx> TIME 0 //The charge timer sets to OFF
Query Syntax
TIMEr?
<float>
TIMEr
:CHARge
:SAMPle
<float>
<float>