A. Specifications
51
B Error message
Tx> comp:re
Rx> ’re’ Bad command.
Tx> comp:beep:set nng
Rx> ’nng’ Parameter error.
Tx> comp:res abc
Rx> ’abc’ Parameter error. (should be number)
Tx> comp:res
Rx> ’res’ Missing parameter.
Tx> comp
Rx> ‘’ Invalid separator.
Tx> comp:res 100gg
Rx> ‘100gg’ Numeric data error.
Tx> comp:res 100x
Rx> ‘100x’ Numeric data error.
Tx> stat:char
Tx> volt 100V
Rx> ‘volt’ Invalid command. (Available under TEST state)
Tx> comp:res 1.2345678901234567890e2
Rx> ‘1.2345678901234567890e2’ Numeric data error
@Instruments
-AT682/683 User‟s Manual-
Rev.C
http://www.applent.com
©2005-2009 All rights are reserved. Applent Instruments Inc.