AT682/683 User’s Manual
36
(c) floating point: For example, 1.23e3, 5.67e-3, 123k, 1.23M, 2.34G,
The available range for numeric data is 9.9E37. When numeric data is used as a
parameter, the suffix multiplier mnemonics and suffix units (The suffix multiplier
must be used with the suffix unit.) can be used for some commands as follows.
Table 7-1 Multiplier Mnemonics
7.5 Command Reference
All commands in this reference are fully explained and listed in the following functional
command order.
FUNCtion
VOLTage
CORRection
COMParator
STATe
TIMEr
APERture
SYSTem
TRIGger
FETCh?
ERRor
Common Command:
*IDN?
*RST
The explanation of each subsystem command is patterned as follows.
1. Subsystem command name
2. Command Tree (Subsystem command only)
3. Compound Command Name
4. Command Description
5. Command Syntax
6. Example Using the Above Command Syntax