7. SCPI Command Reference
37
7. Query Syntax
8. Query Response
9. Example Using the Above Query Syntax
10. Constraints
7.6 Function Subsystem
The FUNCtion subsystem command group sets the measurement parameter and
measurement range.
Figure 7-2
FUNCtion
Command Tree
:RESistance
The :RESistance command sets the measurement parameter to resistance (R).
:CURRent
The :CURRent command sets the measurement parameter to current (I).
:RANGe
The :RANGe command sets the measurement range. If the current range was AUTO,
then converted to manual.
FUNCtion:RANGe {<integer>,MIN,MAX}