AT682/683 User’s Manual
14
Super Fast Test Rate
55 readings/second with 1,999 counts
Built-in 2 timers
Charge Timer: 0s~999.9s
Sample Timer: 0s~999.9s
Trigger mode: Internal Trig, Manual (Remote) Trig and External (Handler) Trig.
2.3 Feature Overview
High brightness VFD
window size: 98mm×58mm
Correction (Zeroing) Function
Zero out test lead and fixture measurement errors.
Built-in Comparator (Sorting)
Thirty sets of Record can be used to store user’s data. Display on VFD Screen and/or
Output to Handler.
Beep and VFD Brightness can be Adjusted
Setup GD or NG Beep and adjust VFD Brightness.
Interfaces
1. Handler interface: GD/NG Output, Trig Signal Input and EOC (Busy) Output.
2. RS232C interface: SCPI Compatibility, ASCII Transmission.