7. SCPI Command Reference
39
Available under DISCH state
7.8 CORRection Subsystem
The CORRection subsystem command group sets the OPEN correction function.
Figure 7-4
CORRection
Command Tree
Tx> CORR
Rx> Clear 0 process, please wait.
Rx> ok.
NOTE:
When clearing, the instrument will ignore any commands.
7.9 COMParator Subsystem
The COMParator subsystem command group sets the comparator function, including
its RECORD NO, LIMIT REFERENCE VALUES and BEEP.
Figure 7-5
COMParator
Command Tree