Applied Biosystems 7500 Fast Getting Started

Preface
Electrical Safety
Applied Biosystems 7500/7500 Fast Real-Time PCR System Getting Started Guide for Standard Curve
Experiments
xx
Electrical Safety
ELECTRICAL SHOCK HAZARD. Severe electrical shock can
result from operating the Applied Biosystems 7500/7500 Fast Real-Time PCR System
without its instrument panels in place. Do not remove instrument panels. High-voltage
contacts are exposed when instrument panels are removed from the instrument.
Fuses
FIRE HAZARD. Improper fuses or high-voltage supply can
damage the instrument wiring system and cause a fire. Before turning on the instrument,
verify that the fuses are properly installed and that the instrument voltage matches the
power supply in your laboratory.
FIRE HAZARD. For continued protection against the risk of fire,
replace fuses only with fuses of the type and rating specified for the instrument.
Power
ELECTRICAL HAZARD. Grounding circuit continuity is vital for
the safe operation of equipment. Never operate equipment with the grounding conductor
disconnected.
ELECTRICAL HAZARD. Use properly configured and approved
line cords for the voltage supply in your facility.
ELECTRICAL HAZARD. Plug the system into a properly
grounded receptacle with adequate current capacity.
Overvoltage
Rating
The Applied Biosystems 7500/7500 Fast Real-Time PCR System has an installation
(overvoltage) category of II, and is classified as portable equipment.
Physical Hazard Safety
Moving Parts
PHYSICAL INJURY HAZARD. Moving parts can crush and cut.
Keep hands clear of moving parts while operating the instrument. Disconnect power
before servicing the instrument.

Applied Biosystems 7500 Fast Specifications

General

Brand	Applied Biosystems
Model	7500 Fast
Category	Laboratory Equipment
Language	English