WorldCast Equinox - Release 3.1 - user manual – 07/2011
Page 52
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | http://www.aptcodecs.com | contact@aptcodecs.com
Remote Status setup
The Embedded option for Remote Status will only appear if Aux Data has been enabled in Embedded
mode and set to a rate greater than 2400 baud
Relay Options
The two choices are 4 Relays (with 4 alarm relays) or 7 Relays (option we have today with Enhanced apt-X)
(with 1 summary/power fail alarm).
If the 4 relay option is used, the relays which can be used are: Autosync, IMUX unlocked, Connection Ac-
tive (Alarms 2,3,4 – see section 4.6.3)
The next screen will ask about front and back operation – both will operate as before.
Front Panel menu item Remote Input can be changed as follows:-
For 7 relay operation like this:
Remote Input
Remote Input Setup
Key No. Toggles Mode
INPUT 1 * 2 * 3 * 4
MODE*OFF*OFF*OFF*OFF
INPUT 5 * 6 * 7
MODE*OFF*OFF*OFF
Remote Status Setup
Use Enter To Select
4 Relays
7 Relays
Remote Status Setup
Use Enter To Select
Off.
Embedded
To Next Page
Loading...