WorldCast Equinox - Release 3.1 - user manual – 07/2011
Page 90
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | http://www.aptcodecs.com | contact@aptcodecs.com
5.8.10. Left + Right / 2 Mono Operation
This feature sums the left and right input PCM streams and divides these by 2 to form stereo-ised mono
channel. This means the user will receive all the content on the left and right channels but lose the stereo
separation. This would be useful when a stereo primary channel is required but have a lower bandwidth
backup using a mono channel.
This feature is available in all mono modes.
5.8.11. Input / Output clip level settings
They can be set between 0 and 24 dBu. Use the up and down arrows to change this value.
Input clip level
Use Enter To Select
18dBu
16dBu
20dBu
24dBu
(L+R)/2 Mono Mode Setup
Use Enter To Select
Off.
On.
To Next Page
Loading...