WorldCast Equinox - Release 3.1 - user manual – 07/2011
Page 80
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | http://www.aptcodecs.com | contact@aptcodecs.com
5.7.8. Auto Port Range
Set the port range to a range of port numbers which are involved in the auto negotiation of the port. Other units
communicating via SIP with this unit will need to have a port within this range in order to get a successful con-
nection.
Auto Port range
5.7.9. Global IP Settings
These IP settings are generic across each of the SIP calls made. It is possible to have auto port, packetsize
and latency.
Global IP Settings
5.7.10. Supported Algorithms
It is possible with SIP operation to choose which algorithms are preferred. It is possible to pick up to 8 algo-
rithms.
Global IP Settings
The following algorithms are supported for use with SIP:
Eapt-X16
Eapt-X24
Supported Algorithms
Use Enter To Select
Select Entry to Edit
1) Unconfigured
2) Unconfigured
3) Unconfigured
4) Unconfigured
Global IP Settings
Use Enter To Select
Transmit QoS 0.
Pkt Size 256
Rx Latency (ms) Auto
Route Direction Bi
Port no. Auto
Auto Port Range
Use Enter To Select
From To
RTP 5080 5130
To Next Page
Loading...