4
1 IDENTIFICATION OF THE IMPLEMENT
The control box can be clearly identified based on the serial number. The serial number can be found on
the rear side of the control box.
NOTE!
In cases of inquiries or warranty claims, please always tell us the serial number of your
implement.
1.1 INTENDED USE
Control Box 5.2 may only be used to control Pneumatic Seeders (PS 120-1600 incl. Fertiliser Editions),
Liquid Fertilizers (LF), Universal Dispensers (UDW) or Multi-Metering Systems (MDG/MDC, MDP, MDD).
Please also observe the operating manual for your Pneumatic Seeder / Liquid Fertilizer / Universal
Dispenser / Multi-Metering System.
Do not use Control Box 5.2 to control other implements.
2 SERVICE
Please contact our service address in the following cases:
If you still have questions regarding the handling of this implement despite the information provided in
this operating manual
For questions regarding spare parts
To order maintenance and repair work
Service address:
APV Technische Produkte GmbH
Zentrale: Dallein 15
A-3753 Hötzelsdorf
AUSTRIA
Telephone: +43 2913 8001-5500
Fax: +43 2913 8002
Email: service@apv.at
Web: www.apv.at
3 WARRANTY
Please check the implement for any transport damage immediately upon receipt. Later claims regarding
transport damage can no longer be considered.
We provide a one-year factory warranty as of the date of delivery (your invoice or the delivery slip serve
as a warranty certificate).
This warranty is applicable for cases of material or construction faults and does not include parts that are
damaged by normal or excessive wear.
The warranty expires
if damage is caused by external forces,
if the control box is opened,
in cases of operating errors,
if the prescribed requirements are not met,
if the implement is modified, expanded or equipped with third-party spare parts without our
permission,
in cases of water ingress.