APV 5.2 Operating Manual

8
4.4 INITIAL OPERATION
Explanation of the abbreviations
 SS: seeding shaft
 M: motor revolutions
 km/h: speed in kilometres per hour
 kg/ha: weight in kilograms per hectare
 l/ha: litres per hectare
 Grains/m²: grains per square metre
For the initial operation or when it was restored to factory setting in
the Programming menu, the following settings must be entered on
your Control Box 5.2:
Scan the QR code to view
the "Initial operation of the
PS" video.
4.4.1 LANGUAGES
Select your desired menu language here:
Language
Language
Select the desired language with the plus/minus buttons and confirm with the
OK button.
You can go back to the Main menu with the OK button.
Langue
Язык ?
German
4.4.2 UNITS OF MEASURE
Select metric (m, ha, km/h, kg) or imperial (ft, ac, mph, lb) measuring units.
14. Units of measure:
Use the plus/minus buttons to select metric (kg, ha, m) or imperial (lb, ft,
ac) and confirm with the OK button.
4.4.3 MACHINE TYPE
Here, you can select your implement type (PS, MDP, MDG/MDC, MDD, UDW, LF).
0. Implement type:
Select using the plus/minus buttons and confirm with the OK button.
4.4.3.1 IMPLEMENT TYPE 1 (FOR PS)
1. Implement type:
If you previously selected "PS" as the implement type, the system now asks
which PS it is.
4.4.3.2 SERIAL NUMBER (ONLY FOR PS 800)
Here, select whether your PS 800 has a serial number higher than 01300. This will store the right motor
characteristic in the control box.
S/N > 04011-01300
Select using the plus/minus buttons and confirm with the OK button.
4.4.4 FAN
Here, you must select whether an electric or hydraulic fan is installed on your PS.
1. Elec. fan equipped:
OFF: no fan equipped (for LF)
Hydraulic/external: hydraulic (or external) fan equipped
Electric: electric fan equipped
Electric PLUS: electric fan PLUS equipped
Select using the plus/minus buttons and confirm with the OK button.

APV 5.2 Specifications

General

Brand	APV
Model	5.2
Category	Control Unit
Language	English