Arcam A38 - AMP Command Functions; Menu Navigation Commands; Source Selection Commands; Display Control Commands

E-13
English



















 

  













Amp commands
2
POWER – Switches A38 between stand-by
and on
19
Some number keys can be used for source
selection:
1 DVD input
2 Not used for A38
3 AV (television sound input)
4 AUX Auxiliary line input
5 Not used for A38
6 SAT Satellite decoder input
7 TUN DAB/FM/AM tuner input
8 CD input
9 Not used for A38
SHIFT
Modies many keys (see individual key
descriptions, below)
BC
D E
Navigate the menus on Arcam surround
ampliers. OK conrms a selection.
SHIFT +
B
to Power on
SHIFT +
C
to Power o
OK
Conrms a setting (equivalent to ‘Enter’ or
‘Select’ on some remote controls)
MODE
Cycles through Display modes on the front
panel
MENU
Displays the Amplier menu on the front
panel
DISP
Cycles through Display panel brightness
options (dim to bright, o)
-
Press once to mute the speaker and pre-amp
outputs. Press for a second time (or change
the volume) to unmute the unit.
Decrease () and increase (+) amplier
volume