ARCIMOTO FUV - Page 47

CONTROLS
Always start the FUV with the Direction switch in
Neutral (•)
As a safety feature, the Direction switch must be switched
from Neutral to Forward or Reverse before the FUV will
move.
If the FUV is started with the Direction switch in either
Forward or Reverse, the FUV will not move until the
Direction switch is first switched to Neutral, then switched
to Forward or Reverse.
Always bring the FUV to a complete stop before
changing the Direction setting.
Always place the FUV in Neutral (•) and apply the Parking
Brake (via the Parking Brake button on the Control Panel -
see page 44) before shutting down.
See the Getting Started section on page21 for details.
Throttle
Twist the throttle to start rolling in the direction set on the
Direction switch. Spring tension returns the throttle to the
rest position when released.
Always check the Direction switch before twisting the
throttle.
FUV Owner's Guide - 33