CONTROL PANEL
hold again to switch to LOW. If you press and hold the
button while the wiper is set to LOW, it turns the wiper
off.
In cold weather, always turn off the wiper switch and
allow the wipers to return to the park position before
turning off the vehicle. If the wiper switch is left on and
the wipers freeze to the windshield, damage to the wiper
motor may occur when the vehicle is restarted.
l Do not operate the wiper when the windshield is
dry. This could damage the wiper blade and scratch
the windshield. If it is necessary to use the wiper in
dry conditions, use plenty of washer fluid.
l Ensure that the wiper blade is not frozen or stuck to
the windshield before turning the wiper on.
l Ensure that the wiper blade is free of ice. Ice has
sharp edges that can damage the rubber on the
blade.
l Check the wiper blade periodically for wear and
tear. A worn or damaged wiper blade can cause
smearing on the windshield.
Wiper Fluid Spray
Press the Wiper Fluid Spray button to spray wiper fluid on
the windshield. All 3 LEDs light when this button is
pressed.
Sudden loss of visibility through the windshield could
lead to a collision. You might not see other vehicles or
other obstacles. To avoid sudden icing of the windshield
during freezing weather, warm the windshield with the
defroster before and during windshield washer use.
FUV Owner's Guide - 41
To Next Page
Loading...
