SBC-GX1 Windows XP Embedded Quickstart Setting up Windows Embedded Studio
Updates
The Microsoft .NET Framework 1.1 component was not available at the time Windows
XP Embedded Studio (SP1) was released. To include this component, an update from
Microsoft must be installed. A few additional updates are also required for the Standard
XPe image included with the Development Kit. These updates are:
Q811279: Repository look-up may cause incorrect files to be copied. •
•
•
•
•
•
•
Q831558: NET Framework 1.1 component for Windows XP Embedded with SP1.
Q810144: System cloning resets runtime information.
Q828741: Security update for Windows XP Embedded with SP1.
Q823025: Certain Enhanced Write Filter (EWF) commands do not work properly.
Q818822: Programmatically control EWF APIs.
Q816654: Blue screen error IRQL_NOT_LESS_OR_EQUAL using EWF.
The repository update (Q811279) is an update for Target Designer and must be
installed prior to the other updates. All these updates can be downloaded from the
Microsoft website at www.microsoft.com/downloads
.
Viewing components
To view all the components, set the visibility to 100. To set the visibility, open Target
Designer and select Tools → Options → Advanced → Minimum visibility.
If you just want to view Arcom components, you can create a filter by following the steps
below:
1 Open Target Designer and select Tools → Filter Manager → New.
2 Enter the name Arcom to represent this new filter.
3 Double-click on Component Display Name Contains under Filter Rules.
4 Double-click on Component Display Name Contains, which now appears in the
Filter Description window with the heading Filter Rule and Edit box. The
following words are displayed:
Enter String
5 Enter the string Arcom in the edit box and then click on OK. You return to the
Filter Editor window.
6 Click on OK in the Filter Editor window.
© 2004 Arcom Issue D 36
To Next Page
Loading...
Need help?
General
