The Arkel ArLine is a remote alarm, monitoring, and intercom system designed for lifts. It offers a comprehensive solution for ensuring safety and communication within elevator systems, complying with EN 81-28 and EN 81-20 standards. The system consists of a main unit (Arkel ArLine-M) and various speech units (Arkel ArLine-S-COP, Arkel ArLine-S-TP, Arkel ArLine-S-INT) that communicate to provide two-way communication with rescue services, remote monitoring, and alarm functionalities.
Function Description
The Arkel ArLine system provides a robust communication link for elevator users and rescue services. When an alarm is triggered, the system initiates a call to pre-defined phone numbers, allowing for two-way voice communication. It also transmits alarm information and system status to the ARKEL Cloud remote lift management system, and optionally via SMS. The system supports various alarm inputs, including external alarm buttons, and provides visual indicators (pictograms) within the car to inform users of the alarm status.
The main unit, Arkel ArLine-M, acts as the central hub, managing GSM/GPRS communication, battery backup, and connections to the speech units and the lift control system. It features programmable inputs and relay outputs, allowing for flexible integration with different elevator systems. The speech units, Arkel ArLine-S-COP (car operating panel), Arkel ArLine-S-TP (top of car/pit/under car), and Arkel ArLine-S-INT (machine room/control panel), provide the necessary microphones, speakers, and alarm buttons for communication at various points in the lift installation.
The system also includes an automatic communication test (3-day test) to ensure continuous functionality and can operate in a "firefighter mode" for specific emergency scenarios. Remote updates of the device software are supported via the internet, ensuring the system remains up-to-date.
Important Technical Specifications
Arkel ArLine-M (Main Unit):
- Mobile Communication: Quad-Band 850/900/1800/1900 MHz, 2G (GSM), GPRS.
- RF Output Power: Class 4 for EGSM 850/900 MHz (2W/33dBm max.), Class 1 for DCS 1800/1900 MHz (1W/30dBm max.).
- SIM Card: Nano SIM (4FF).
- Antenna: GSM, 2-3 dBi, 50 ohm (with 3m cable), SMA (Female) connector.
- Internal Battery: 12V/1.2Ah maintenance-free dry battery, built-in with 2-pin special connector cable.
- Battery Charging: 13.6 VDC, max. 100 mA (Max. ~12 hours).
- Supply Time (fully charged battery): Standby state ~3 hours, alarm talk ~2 hours.
- Unit Supply: 16-30V DC, max. 500mA @ 24V DC.
- Programmable Inputs (IN1-IN5): 8-30V DC, 5 mA, insulated with double direction optocoupler.
- Supply Outputs for Arkel ArLine-S units (PWR, GND): 10-30V DC, max. 400 mA.
- Supply Outputs for Programmable Inputs (INCOM): 10-30V DC, max. 200 mA.
- Programmable Relay Outputs (OUT1, OUT2): Max. 2A, max. 230V AC; max. 30V DC.
- Speaker Interface: CAR, PIT, EXT, FF (RS-485 serial communication).
- Lift Control System Interface: CANbus serial communication (4-pin custom connector), compatible with ARKEL products.
- User Interface: 1 button, Information LEDs.
- Dimensions: 163.20 x 133.23 x 72.20 mm.
- Weight: 1.3 kg (including battery).
- Operating Temperature: +5°C - +40°C.
- IP Code: IP20.
- Box Material: Metal.
Arkel ArLine-S-COP (Car Operating Panel Speech Unit):
- Unit Supply: 10-30VDC, max. 120mA @ 24V DC.
- External Alarm Button Input (ALB1, ALB2): 8-30VDC, 5 mA, insulated with double direction optocoupler.
- External Microphone Input (MIC (+,-)): Capacitive microphone with 2 special connectors.
- Supply Output for Alarm Button and Pictogram LEDs (COM+, COM-): 10-30VDC, max. 100mA.
- External Green Pictogram LED Output (GRE): 10-30VDC, max. 50mA.
- External Yellow Pictogram LED Output (YEL): Transistor (GND) output, short-circuit and overcurrent protection.
- External Speaker Output (SPE): 8R speaker with 2 special connectors.
- Arkel ArLine-M Interface (A, B): RS-485 serial communication.
- Dimensions: 100 x 65 x 14.1 mm.
- Weight: 40g.
- Operating Temperature: +5°C - +40°C.
- IP Code: IP00 (Proper protection must be provided in the car operating panel to meet the desired IP level).
Arkel ArLine-S-TP (Top of Car/Pit Speech Unit) and Arkel ArLine-S-INT (Machine Room/Control Panel Intercom Unit):
- Unit Supply: 10-30VDC, max. 120mA @ 24V DC.
- Arkel ArLine-M Interface (A, B): RS-485 serial communication.
- Dimensions: 72.3 x 141 x 24mm.
- Weight: 250 g.
- Operating Temperature: +5°C - +40°C.
- IP Code: IP20.
- Box Material: Metal.
Usage Features
- Easy Installation: The main unit should be installed in an easily accessible location, preferably within the lift control panel or machine room, with optimal GSM signal reception. Antenna placement is crucial and guidelines are provided to ensure strong signal.
- SIM Card Management: The system requires a Nano SIM card with 2G network support, mobile voice communication (at least 100 min/operator), and data communication (at least 200 MB internet). PIN code removal from the SIM card is essential before insertion.
- Alarm Initiation and Termination: Alarms are initiated by pressing and holding the external alarm button for 3 seconds. Alarms can be terminated by pressing the user button on the Arkel ArLine-M for 3 seconds or via the ARKEL Cloud system.
- Sound Adjustment: The volume of the speech units can be adjusted using a trimpot, ensuring the loudspeaker sound complies with site conditions (35-65 dB(A) at 1m distance).
- Identification of Speech Units: Arkel ArLine-S-TP and Arkel ArLine-S-INT units require unique identification via DIP switches, ensuring proper communication within the system.
- LED Indicators: Various LEDs on the main unit and speech units provide visual feedback on power status, GSM signal strength, battery status, SIM card status, alarm status, and communication activity.
- Intercom Functionality: The system supports two-way communication between the car, machine room, pit, and rescue services, complying with EN 81-20 standards.
- ARKEL Cloud Integration: The system seamlessly integrates with the ARKEL Cloud remote lift management system, allowing for remote monitoring, alarm management, user and building management, and event logging.
- SMS Parameter Setting: Key parameters can be configured remotely via SMS commands, providing flexibility and convenience for system adjustments.
- AREM Parameter Setting: Parameters can also be set using the ARKEL Remote Elevator Manager (AREM) software, which connects to the Arkel ArLine-M via CANbus.
Maintenance Features
- Battery Management: The Arkel ArLine-M includes a battery backup system that ensures continued operation during power outages. Regular battery tests are performed automatically, and the system provides alerts if the battery capacity is low or faulty. The battery is replaceable.
- Remote Updates: The device software can be updated remotely via the internet, allowing for easy maintenance and feature enhancements without on-site intervention.
- Diagnostic LEDs: The comprehensive LED indicators on all units assist in quick troubleshooting by showing the status of power, GSM signal, battery, SIM card, and communication.
- Event Logs: The ARKEL Cloud system maintains detailed event logs, including alarm activations, calls, errors, and battery status, which are valuable for diagnostics and maintenance planning.
- Automatic Communication Test: The system performs an automatic communication test every 3 days to verify the functionality of the alarm system, ensuring reliability and compliance.
- Troubleshooting Guidelines: The manual provides detailed instructions for troubleshooting common issues, such as SIM card errors, GSM signal problems, and battery faults.
- Inspection and Testing: Guidelines are provided for inspection and testing before the lift is taken into service, covering alarm functionality, emergency power supply, communication, and information in the lift car, in accordance with EN 81-28:2018, 6.3.
Need help?
General
To Next Page