142 MENU > User buttons
•
Flip monitor: Switches the monitor flip function on or off.
•
Prerecording: Switches pre-recording on or off.
•
Auto Iris: Triggers automatic iris compensation***.
•
Open iris: Opens the iris of a lens. Short press opens by 1/x stop (step size
depending on lens), long press opens by 1 stop per 0.5 seconds***.
•
Close iris: Closes the iris of a lens. Short press closes by 1/x stop (step size
depending on lens), long press closes by 1 stop per 0.5 seconds***.
•
Return In: Activates return signal connected to RET/SYNC IN BNC connector
on SDI and/or EVF/Monitor image paths, depending on preconfiguration via
MENU > Monitoring > Return in path config. Supports smart behavior.
•
BT talkback: Switches the talk-back channel via Bluetooth to Open (signal is
recorded) or Muted (signal is not recorded).
•
Audio solo: Mutes all audio recording channels except one. Toggles through
Off, Ch1, Ch2, Ch3, Ch4, selecting the next channel with every button press.
Channels that are not assigned to an audio input are skipped. Does not work
when audio is disabled or switched off. Works in playback for all channels and
on all clips, as information on clip audio is not available. This may result in
a selection of an unassigned channel when playback is exited. In this case,
press button once to select the next assigned channel. When solo is active, the
selected channel is marked as SOLO in the audio bars of EVF, monitor and
SDI, on the homescreen and the audio display.
* Affects both viewfinder and monitor settings. ** Requires advanced license.
*** Requires both an EF lens mount and a suitable EF lens.
User button smart behavior: For these user button functions, a short press toggles the
function, while a longpress activates the function only temporarily.
Example: Press EVF zoom long > EVF zoom function is activated, release of button
deactivates zoom. Press EVF zoom short > EVF zoom is activated. Press again to
deactivate.
To Next Page
Loading...
