Arris IPC4100 - Page 43

Chapter 10:
STANDARD 365-095-33577 Revision x.1 IPC4100 Release 1.0 Installation and Operation Guide
43
Field Description
Data ID A value generated by the CableCARD for the Pairing report.
Validation  UKNOWN if a Validation message was not received by the product
 VALID or INVALID as set by the Host Validation Message received from the
headend
 BINDING if the CableCARD is busy with the binding authentication process
 NOT BOUND if Card validation status in not bound for CableCARD reasons
 HOST CERTIFICATE INVALID if the status is not bound because the Host
Certificate was invalid
 HOST SIGN FAILED if status is not bound because of failure to verify Host’s
SIGN
 AUTH KEY FAILED if status is not bound because of failure to match AuthKey
from the Host Device
 FAILED if binding failed for other reasons
Pairing Method Set to ‘MMI’ or ‘Reportback’ as received by a message from the headend, or set
to ‘Unknown’ if the headend message was not received.
Provider Phone # Phone Number of the Provider as configured at the headend.
Cable Card
Object Name Code object name executing on the CableCARD.
Object Ver. Code object version executing on the CableCARD.
Manufacturer CableCARD manufacturer.
HW Version Version number provided by the CableCARD.
Boot Version Version number provided by the CableCARD.
2nd Version Version number provided by the CableCARD.
Serial Number The CableCARD Serial Number provided by the CableCARD.
MAC Address The CableCARD MAC Address provided by the CableCARD.